Hi Jörg,[IDC]Dragon wrote:
I can build some of these, for people who appreciate my work and have good use for it. Before doing so, I need to find a source for the 40 pin connector with a reasonable price.
I had the same issue with a GertVGA board, I think it's unavoidable with the 40 pin header, with so many connections it will be a tight fit and easy to become frustrated when removing it. Once one end is up you are so relieved that it's moving that you keep pulling on the end that has moved and as a result you bend the pins at the other end (I think that this is what happened in my case at least).Man in a van wrote: Only caveat I have is that the pin header is a really tight fit, as in REALLY TIGHT (I bent the end pins on removing the board ).
The official line I've seen is that any hardware add-on that works with a A+/B+ will work with a 2B. The board is identical to the B+ except it's got a BCM2386 chip on the top and a 1GB RAM chip on the bottom.markusA wrote:I just received mine and it is a beauty. Very professionally done, impressive to say the least.
In the documentation for the Pi 2 it says it's compatible with the B+ but it would be nice to hear confirmation from IRL trials.
Code: Select all
sudo su cd /boot wget https://github.com/raspberrypi/firmware/raw/master/boot/overlays/hifiberry-digi-overlay.dtb echo "dtoverlay=hifiberry-digi" >> config.txt