reflow
Posts: 2
Joined: Sun Mar 16, 2014 12:34 pm

Output to VGA

Sun Mar 16, 2014 12:38 pm

Is it possible to output in VGA through the usage of an adapter?

User avatar
stevepdp
Posts: 285
Joined: Fri Oct 28, 2011 7:41 am

Re: Output to VGA

Sun Mar 16, 2014 12:43 pm

Yes, VGA adapters are known to work with Raspberry Pi.

See this doc at the elinux wiki for a list of known working adapters and other important info. They can be pretty tricky to set up depending on the adapter used.

You'll likely also want to research VGA specific settings for your /boot/config.txt

User avatar
FTrevorGowen
Forum Moderator
Forum Moderator
Posts: 5116
Joined: Mon Mar 04, 2013 6:12 pm
Location: Bristol, U.K.
Contact: Website

Re: Output to VGA

Sun Mar 16, 2014 2:44 pm

stevepdp wrote: ...
You'll likely also want to research VGA specific settings for your /boot/config.txt
FWIW, this page of mine may be of interest:
http://www.cpmspectrepi.webspace.virgin ... GA_Monitor
Trev.
Still running Raspbian Jessie or Stretch on some older Pi's (an A, B1, B2, B+, P2B, 3xP0, P0W, 2xP3A+, P3B+, P3B, B+, A+ and a B2) but Buster on the P4B's. See: https://www.cpmspectrepi.uk/raspberry_pi/raspiidx.htm

Return to “Beginners”