david_1234
Posts: 238
Joined: Mon Jan 01, 2018 2:14 pm

PI4-buster Vs. PI3-stretch

Mon Oct 28, 2019 3:29 pm

Hello ,
up until now I run my code on PI3-stretch
wanted to know if there are any changes I need to do in the setting when moving to buster ?

I want to remove the pi icons at startup,diable the black screen after 10 min , show my own logo in boot
this is what I did until now:

Code: Select all

Sudo nano /boot/config.txt
Add this line:
disable_splash=1

Sudo nano /boot/cmdline.txt
Add this to the end of the line 
logo.nologo 

change the image splash.png (with my own image) in
/usr/share/plymouth/themes/pix/

sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart.txt
@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xset s noblank
@xset s 0
@xset -dpms
point-rpi
@chromium-browser --start-fullscreen --start-maximized /home/pi//angular-node/src/startPage.html

upload the memory to 1024 in: ---? do I still need to do this? (I'm using PI4 4G)
sudo nano /etc/dphys-swapfile

Thanks ,



****Update****
I have try to run with this setting:
I don't see the 4 pi icons at startup
I don;t see the splash.png image I have uplaoded
and it's seem that this command is not working
@chromium-browser --start-fullscreen --start-maximized /home/pi//angular-node/src/startPage.html

The browser is not open on startup
but if I run the command on the CMD - it's working and my code \webpage is running with out any problem
why?
Last edited by david_1234 on Mon Oct 28, 2019 3:57 pm, edited 2 times in total.

jahboater
Posts: 4928
Joined: Wed Feb 04, 2015 6:38 pm

Re: PI4-buster Vs. PI3-stretch

Mon Oct 28, 2019 3:45 pm

david_1234 wrote:
Mon Oct 28, 2019 3:29 pm
upload the memory to 1024 in: ---? do I still need to do this? (I'm using PI4 4G)
sudo nano /etc/dphys-swapfile
No. That gave an extra 1GB of swap space providing 2GB in total of virtual memory.
You now have 4GB of real memory!
Its unlikely you will need much, if any, swap for a 4GB Pi4.

david_1234
Posts: 238
Joined: Mon Jan 01, 2018 2:14 pm

Re: PI4-buster Vs. PI3-stretch

Mon Oct 28, 2019 3:56 pm

OK , Thanks (As I thought - but wanted to be sure)

and on the other issues?

Return to “Beginners”