mems microphone

[k1ng1]

hey sorry iam new to raspberry pi and maker in all, i have a project in mind
but would like to know more does the raspberry pi zero w allow connection with this
mems https://blog.adafruit.com/2017/02/23/ne ... h0645lm4h/

[gregeric]

I'm 99% certain that the Knowles SPH0645 used on that Adafruit breakout will work with the driver & steps for the Invensys ICS43432 I described here: viewtopic.php?f=44&t=173640

[k1ng1]

cool thanks

[k1ng1]

ok so after a long waiting i have got the board but had to change the microphone with this new one from adafruit https://www.adafruit.com/product/2716 same question, it seems that i cannot find any info about connection with raspberry no any tutorial, will appreciate any help thanks!

[gregeric]

That's not an I2S mic, which would allow you to connect it directly to the Pi's I2S port.

Instead, it has an analogue output, & as such needs an additonal ADC board between it and the Pi.

[k1ng1]

oh ok i see, then which is better though for general audio, should i keep this and buy the ADC board or the i2c

[gkaiseril]

Did you follow the links in the blog to access the Arduino Wiring & Test and Raspberry Pi Wiring & Test

[k1ng1]

Yes i have seen that, but thats for the i2c mic that i don't have yet, i have the spw2430 microphone and it seem that i will require another board to connect with the pi. i am now considering getting the i2c that was mentioned but i would like to know which is better.