Not sure if it's useful for your use case, but to slow down the rpix86 emulation I simply temporary slow down the Pi itself. Very easy by performing these commands before running rpix86 (adjust the speed -300MHz in the example- to your own needs):Maybe (just an idea) an option to control how many CPU cycles per second are being emulated would be helpfull for these.
Code: Select all
echo "300000" | sudo tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq > /dev/null echo "powersave" | sudo tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor > /dev/null
Code: Select all
echo "700000" | sudo tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq > /dev/null echo "ondemand" | sudo tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor > /dev/null
Hi Patrick / Pate,Pate wrote:rpix86 version 0.14 released!
Hi Patrick and thank you, rpix86 is now up and running on my rPi!Pate wrote: @antiriad: Thanks, you are welcome! You can get the 4DOS.COM temporarily from my web site at http://rpix86.patrickaalto.com/4DOS.COM or you can simply let rpix86 download it for you.
Don't be! As long as you keep to the pre set levels in the raspi-config (up to Turbo 1GHz) the effect in minimal and to get the best results from most emulators overclocking is generally a prerequisite. In a previous discussion with a user on this subject dom (one of the Tech moderators here) stated it only has a minimal effected on the life expectancy of the SOC (See below). The latest drivers are also much more stable, reducing the problem of SD Card corruption at higher Overclock levels.jamesrimmer.it wrote:I'm uber paranoid about overclocking