I have a number of Raspberry pis. I mirrored one of the SD cards and everything is working fine.
Once i inserted the SD card into the raspberry pi, i connected remotely to it and I changed the IP address. Lets say i changed it to 10.1.6.10 for purposes of this discussion. I then had a problem with the one SD card so i took it out and i plugged it into another raspberry pi which i had previously assigned the op 10.1.6.25.
The problem is that when i went to check the ip of the box (which i thought was 10.1.6.25) after i inserted the SD card, it showed me that the IP was 10.1.6.10.
Am i missing something here? Why did the ip not remain 10.1.6.25?