Is there a way to use the HForm (included in the RPi image; I think
) to use the whole SD card for Risc OS? Would be very grateful if I get some help here.
Though use a smaller SD Card, and make your boot device a USB drive (thumb drive, HDD, etc). To do so:
Be careful, you do not want to mess up using !HForm.
1: Use !HForm to format the USB drive wanted to install on.
2: Copy the contents of the SD-Card to the new boot drive.
3: Press [F12].
Code: Select all
Configure FileSystem SCSI
Pressing return after each line.
5: Press return one more time to return to the WIMP.
6: Shutdown and reboot.