If you don't know where to start, I'm pretty sure its going to be too difficult. You need to cross reference the pins on the camera to the pins on the CSI-2 header on the board. The camera attaches straight to the GPU, that's where the driver lives - you have no access to GPU code (it's closed), so need to reply on Arm side libraries to get at the images -OpenMAX is the API we use at the moment. No need for camera specific stuff you might find on the net.tsuriyathep wrote:Actually the camera module in that link has all the pins it needs to connect exposed. I just need jumper wires. I have no idea where to start though, I see bits of linux code and data sheets for that module, but its very confusing.
I'd be inclined to wait for end of Feb when we hope to release the camera board. Much easier.