User avatar
big77pil
Posts: 23
Joined: Fri Apr 12, 2013 8:39 am

12mm lens holder for Pi Camera Boards

Sun Sep 17, 2017 10:00 pm

Hi guys,

Check out my 12mm lens holder design for Pi camera boards. They are 3D Printed.
Let me know what do you think and if I should do any improvements.

https://www.youtube.com/watch?v=l0nsT748rpc

If you have a 3D Printer , the STL file available here : https://www.thingiverse.com/thing:2550073
Free to print for non commercial use.

If you want to buy it , check the link below :
http://www.ebay.co.uk/itm/282666215348

Thanks
Attachments
20170917_161557.jpg
20170917_161557.jpg (164.09 KiB) Viewed 989 times
20170917_161839.jpg
20170917_161839.jpg (219.59 KiB) Viewed 989 times
Last edited by big77pil on Sat Sep 23, 2017 1:38 pm, edited 1 time in total.

Project XXX
Posts: 15
Joined: Thu Oct 02, 2014 9:36 pm

Re: 12mm lens holder for Pi Camera Boards

Fri Sep 22, 2017 10:37 am

Will you share the stl file?

User avatar
big77pil
Posts: 23
Joined: Fri Apr 12, 2013 8:39 am

Re: 12mm lens holder for Pi Camera Boards

Fri Sep 22, 2017 10:59 am

Yes, I will upload it soon on thingiverse but bear in mind that you will need a tap drill to make the thread. Will also make them available on ebay.

Thanks

User avatar
big77pil
Posts: 23
Joined: Fri Apr 12, 2013 8:39 am

Re: 12mm lens holder for Pi Camera Boards

Sat Sep 23, 2017 1:37 pm

STL file available here : https://www.thingiverse.com/thing:2550073
Free to print for non commercial use.

If you want to buy it , check the link below :
http://www.ebay.co.uk/itm/282666215348

Return to “Camera board”