Page 1 of 35

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 3:31 am
by tnelsond
Well, this didn't really seem to fit into any of the other categories, and I know it was talked about briefly in the physical design topic. So what would be some cool ways to make a case for the R-Pi?

I was thinking since an R-Pi is the size of a credit card that since one typically carries credit cards in their wallet that a wallet could act as a great case for this small computer (Watch out for pick pockets).

Or, to be more spy-like (By way of the cheesy spy shows like Get Smart), we could house the R-Pi in stuff like glue bottles, ketchup bottles, pop cans, cassettes, calculators, vhs tapes, cd cases, shoes, keyboards, hats, whatever.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 6:25 pm
by Raikomaru
I'd love to fit it into a keyboard, along with an portable HDD.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 7:07 pm
by Willofield
i found an Case (i think it's for industrial Computers or something) http://www.watterott.com/de/Be.....d-Gehaeuse but i'm not sure if you can put a Raspi in it without modify the case.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 8:28 pm
by gerits
Quote from Willofield on August 12, 2011, 20:07
i found an Case (i think it's for industrial Computers or something) http://www.watterott.com/de/Be.....d-Gehaeuse but i'm not sure if you can put a Raspi in it without modify the case.

You probably would have to modify it. And since the case is more expensive then the raspi, you can better make a DIY project out of it.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 8:42 pm
by Mr_Navigator
Inside an old retro computer case like a QL, Spectrum would be cool.

Any idea how to get an image in to the avatar?

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 8:57 pm
by Willofield
Quote from gerits on August 12, 2011, 21:28
Quote from Willofield on August 12, 2011, 20:07
i found an Case (i think it's for industrial Computers or something) http://www.watterott.com/de/Be.....d-Gehaeuse but i'm not sure if you can put a Raspi in it without modify the case.

You probably would have to modify it. And since the case is more expensive then the raspi, you can better make a DIY project out of it.

You're right... a simple case isn't too difficult to build.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 11:22 pm
by AmyS3
i´m making a carbonfibre one for my model b.
thats gonne be looking awesome.
it´s quite easy to do as well.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 11:26 pm
by ShiftPlusOne
300 pages to choose from...
http://mouser.com/Enclosures/E.....xes-Cases/
All you need is the right dimensions and a dremel.

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 11:33 pm
by AmyS3
got the dremel, need dimensions ;-)

Re: Cases for the Raspberry Pi

Posted: Fri Aug 12, 2011 11:35 pm
by AmyS3
or you can make the case ultra sturdy if you just dunk the raspi in epoxyd...

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 9:27 am
by gerits
You can also just duct tape it to the bottom of a shelf or to the back of your tv. But that is not the kind of respect a raspi deserves.

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 10:18 am
by abishur
I'd be careful using duct tape, it tends to be electrically conductive (so taping up the bottom of the r-pi with it might have shocking results... it might cut your expectations for the r-pi short) ;)

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 2:35 pm
by AmyS3
not to think about ripping off some small components if you try to remove the tape after a while..

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 3:20 pm
by ukscone
being a quarter scottish and as the scots deep fry everything i'm pondering putting a R-Pi in a case filled with oil.

deep fried raspberry pi anyone?

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 4:58 pm
by AmyS3
here here i want one XD

but put it on a stick please...

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 5:36 pm
by gerits
Quote from ukscone on August 13, 2011, 16:20
being a quarter scottish and as the scots deep fry everything i'm pondering putting a R-Pi in a case filled with oil.

deep fried raspberry pi anyone?

Not that it would need any cooling, but it would look nice

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 5:59 pm
by Lob0426
If you are going to actually immerse it you have a lot of work ahead there. I read an article about immersion. He had to seal all of the cans on the board as most of them had fiber seals on the bottom that became soaked and disintegrated. There were some other problems as well. The SD card would be the first worry. In the immersed pc the HDD's were not immersed. You would have to seal all of the connectors to the board. Next you would have to seal all of the connections into the connectors. It can be made to work. If you are serious I will try to find the article again for you.

Overall; I double dog dare you ukscone!!!

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 7:58 pm
by obarthelemy
Hey, since this is in the off-topic section, I've got an anecdote to share. I insist it's authentic, because it' more or less its only quality: at that Republican shindig Saturday in the US, there was a stand selling... deep-fried butter sticks.

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 8:08 pm
by AmyS3
wtf!?!? o0
sounds gross..

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 8:24 pm
by ukscone
Quote from obarthelemy on August 13, 2011, 20:58
Hey, since this is in the off-topic section, I've got an anecdote to share. I insist it's authentic, because it' more or less its only quality: at that Republican shindig Saturday in the US, there was a stand selling... deep-fried butter sticks.

they had a video piece about that on the morning news yesterday.

there is an english style fish and chip shop down the road from me and they do some nice deep fried deserts (deep fried mars bars, deep fried milky way, deep fried twinkies, deep fried suet based puddings......) and i've had deep fried haggis and deep fried blackpudding but deep fried butter just doesn't appeal

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 9:25 pm
by Lob0426
Here is the article on oil cooling at bit tech. I also ran across one using liquid parafin.
http://www.bit-tech.net/moddin.....-mollman/1

deep fried butter thats just, well, dumb. why not just a french fry!

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 11:03 pm
by AmyS3
french fry or fried french ? omg its getting late..

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 11:13 pm
by ukscone
you mean freedom fries? :)

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 11:21 pm
by liz
Isn't silicone oil the gunk of choice (no flash point - you can tell I cook for a living) for cooling these days? I don't think it makes a very palatable potato chip.

Re: Cases for the Raspberry Pi

Posted: Sat Aug 13, 2011 11:26 pm
by ukscone
the examples i've seen on the intertubes suggest mineral oil but i still think 30 gallons of lard would smell nicer