User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Case for PiFace Digital

Fri Feb 22, 2013 1:33 pm

Today I received my Piface PCB and I am making a new box for this new union.
It is a first test, not the final, because I did have the CASE before the new PCB physically and I must set some measures of the windows to make it look better
and any piece cause the buttons to access from outside the box. :mrgreen:
Piface_box1.jpg
Piface box
Piface_box1.jpg (62.77 KiB) Viewed 5850 times
Piface_box2.jpg
Pi face box
Piface_box2.jpg (59.82 KiB) Viewed 5850 times
Piface_box3.jpg
Piface digital BOX
Piface_box3.jpg (59.06 KiB) Viewed 5850 times
The overall dimensions are
40mm high x 68mm wide x 98mm long

These days, I finish the details and I will have ready for sale on eBay and Amazon, if anyone is interested in them. ;)
Last edited by killor on Sat Mar 02, 2013 1:31 pm, edited 1 time in total.
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Re: Pi face BOX

Sat Feb 23, 2013 2:03 pm

Last night, I was doing a case in of birch plywood to accommodate the RPI and PiFACE.
Piface_box5.jpg
RPIFace box
Piface_box5.jpg (60.09 KiB) Viewed 5617 times
Piface_box7.jpg
Raspberry pi face box
Piface_box7.jpg (52.81 KiB) Viewed 5617 times
I made a plywood buttons to access the keypad inside without opening the top. :mrgreen:
Piface_box9.jpg
Raspberry PI face case
Piface_box9.jpg (51.86 KiB) Viewed 5617 times
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

waterman480
Posts: 4
Joined: Wed Mar 20, 2013 6:20 pm

Re: Case for PiFace Digital

Wed Mar 20, 2013 6:25 pm

Ordered my acrylic case on EBay yesterday - can't wait

dan3008
Posts: 1172
Joined: Wed Aug 15, 2012 1:05 pm

Re: Case for PiFace Digital

Wed Mar 20, 2013 10:53 pm

love the plywood buttons :)
dan3008 wrote:Pays your money, takes your choice

User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Re: Case for PiFace Digital and Raspberry Pi

Thu Mar 28, 2013 7:46 pm

This is my last case for Raspberry and Piface made ​​of clear acrylic.
piface01.jpg
Raspberry PiFace acrylic case
piface01.jpg (55.59 KiB) Viewed 4608 times
I added a piece of acrylic to transmit light from the LEDs to the top.


Now also accept Bitcoins (BTC) to sell. :lol: on Bitmit web site.
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

beruic
Posts: 28
Joined: Sun Jan 29, 2012 1:37 pm

Re: Case for PiFace Digital

Wed Jun 12, 2013 8:44 am

It's beautifull in wood.

User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Re: Case for PiFace Digital

Fri Jun 14, 2013 5:38 pm

beruic wrote:It's beautifull in wood.
And more resistant to shocks.
Less electrostatic charge.
Since the grain is always different in some way, each case is unique.
100% biodegradables.
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Re: Case for PiFace Digital

Mon Jul 15, 2013 6:14 pm

I made a new piece for the bottom of the case.
Now the cases is adapted for VESA Mounting Interface Standard (MIS) or colloquially as VESA mount.

VESA MIS-D 100mm x 100mm or 75mm x 75mm

Now we just put the M4 screws and voila! ;)
Piface_vesa.jpg
Piface enclosure with VESA botton
Piface_vesa.jpg (62.66 KiB) Viewed 3204 times
Piface_vesa2.jpg
enclosure Raspberry pi .Adapter for PiFace board and Vesa mount
Piface_vesa2.jpg (61.04 KiB) Viewed 3197 times
Piface_vesa3.jpg
Raspberry Piface plywood case with Vesa mount
Piface_vesa3.jpg (61.8 KiB) Viewed 3197 times
Soon will be available on AMAZON. B00BM4YP2C
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

User avatar
killor
Posts: 186
Joined: Wed Mar 07, 2012 9:11 pm
Contact: Website

Re: Case for PiFace Digital and Digital 2 boards..

Thu Oct 01, 2015 7:10 pm

Hi :!:

I designed a new enclosure model adapted to the new versions of boards
Raspberry Pi 2 and PiFace Digital 2.

Image
Birch ply is made from laminations of birch veneer. It is light but strong, among the strongest and most dimensionally-stable plywoods. :mrgreen:


Made of birch plywood this case keeps the Pi secure, has a hinged top for connector access, and even has little feet cut into the sides so that it stands up above your desk.


Image
You can use all of the connectors on the edges of the Pi: HDMI, Audio/Video, microSD slot, micro USB power, Ethernet and the 4 USB ports.
There's also a cut out to allow a 40-pin IDC cable to the GPIO breakout pins on the Pi and pass it though the case and 2 rectangular openings for PiFACE board ports.
For more advanced hacking, the enclosure is designed so that you can lift or remove the top piece and plug any sort of cables you wish into the breakouts in the middle. :ugeek:

Image

The case is airy enough that no additional vents or cooling is required - we tested the enclosed Pi over a 24 hour period at full load with no significant increase in temperature.

Sales on ETSY https://goo.gl/MEFZTO and eBay sites... ;)
We have a discount for purchases made in ETSY site :o
Discount Codes :MAYTHE4TH :!:

Return to “Other projects”