Technically, that's forwarding not bridging.
Did you mean "without" rather than with?I have a Samsung Smart TV that has ethernet only, in a room with network outlets.
elsmandino wrote: ↑Thu Jun 06, 2019 3:56 pmApologies for the confusion - I did indeed mean to write that the room with the TV has no network sockets in it.
The reason for my query is that I am thinking of hard-wiring my home with ethernet but it is going to take a few months before I am able to get round to it.
My son would like to use the smart TV in his room now so I thought I could use the Pi as a temporary measure - I am not sure I could justify the expense of Power Adapters for such a short period.
Code: Select all
#iface eth0 inet manual allow-hotplug eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255
Code: Select all
interface=eth0 # Use interface eth0 listen-address=192.168.1.1 # Explicitly specify the address to listen on bind-interfaces # Bind to the interface to make sure we aren't sending things elsewhere server=220.127.116.11 # Forward DNS requests to Google DNS domain-needed # Don't forward short names bogus-priv # Never forward addresses in the non-routed address spaces. dhcp-range=192.168.1.50,192.168.1.150,12h # Assign IP addresses between 172.24.1.50 and 172.24.1.150 with a 12 hour lease time
You could but there is no need to use IP adresses in the same range as your router. The TV and the pi's ethernet are not on the same subnet as the router. I'd use a different address range for those as it'll save confusion down the line when you need to do any maintenance.