tmxk4197
Posts: 5
Joined: Fri May 10, 2019 1:39 am

How can I assign an address to Raspberry Pi to use 6LoWPAN with the LoRa module?

Sun May 12, 2019 12:44 pm

We are trying to communicate 6LoWPAN using 2 Raspberry pies and LoRa module (sx1278). After registering the LoRa module, I confirmed that the wpan0 interface was uploaded. I also confirmed using wpan-tools that the lowpan0 interface is up. After running radvd on the gateway, only the wlan0 interface was assigned to the ipv6 address in the End Device, and it was not assigned to the lowpan0 interface.
Can you tell what's wrong?
The following is radvd.conf.

Code: Select all

interface lowpan0{
	AdvSendAdvert on;
	prefix 2005::/64 {
		AdvOnLink off;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};
interface wlan0 {
	AdvSendAdvert on;
	prefix 2003::/64 {
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Return to “Networking and servers”