Hi everyone, I'd like share the WiFi connection of my Pi trought the ethernet cable. I try to configure it but with bad results I follow this guide (https://raspberrypi.stackexchange.com/q ... ernet-port) but have no internet connection on my PC. I need to repeat wifi with address 100.92.xxx.xxx and mask 255.255.192.0 I set the new ethernet connection with:
iface eth0 inet static
in sudo nano /etc/dnsmasq.conf:
interface=eth0 # Use interface eth0
listen-address=100.92.64.1 # listen on
# Bind to the interface to make sure we aren't sending things
server=18.104.22.168 # Forward DNS requests to Google DNS
domain-needed # Don't forward short names
# Never forward addresses in the non-routed address spaces.
# Assign IP addresses between 100.92.64.2 and 100.92.64.100 with a
# 12 hour lease time
What I did wrong?
Hope you can help me, thanks a lot!