interesting project, I have attempted to use my not used Pinnacle PCTV 72e
but could do with beginners guide if anyone could help that would be appreciated.
I am testing it on my testing Debian Laptop as RPi is connected somewhere else
as a simple NAS, but would like to add this project to it as well when I get next month
to play with it.
This is where I got to so far:
Managed to load the firmware for Pinnacle PCTV 72e as per
[1236231.057498] usbcore: registered new interface driver dvb_usb_dib0700
[1237031.027191] usb 1-8: USB disconnect, address 3
[1237033.588198] usb 1-8: new high speed USB device using ehci_hcd and address 4
[1237033.720879] usb 1-8: New USB device found, idVendor=2304, idProduct=0236
[1237033.720888] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1237033.720896] usb 1-8: Product: Pinnacle 72e
[1237033.720901] usb 1-8: Manufacturer: LITEON
[1237033.720907] usb 1-8: SerialNumber: WNF
[1237033.722505] usb 1-8: configuration #1 chosen from 1 choice
[1237033.722870] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[1237033.722881] usb 1-8: firmware: requesting dvb-usb-dib0700-1.20.fw
[1237033.742391] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[1237033.952373] dib0700: firmware started successfully.
[1237034.456074] dvb-usb: found a 'Pinnacle PCTV 72e' in warm state.
[1237034.456264] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[1237034.456566] DVB: registering new adapter (Pinnacle PCTV 72e)
[1237034.666383] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[1237034.882872] DiB0070: successfully identified
[1237034.882970] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/input/input9
[1237034.883040] dvb-usb: schedule remote query interval to 50 msecs.
[1237034.883044] dvb-usb: Pinnacle PCTV 72e successfully initialized and connected.
Downloaded and unziped it to /home/marcel/src/pydvbstreamer-0.1
root@LatitudeD810:/home/marcel/src/pydvbstreamer-0.1# wget http://sourceforge.net/projects/dvbstre ... .1.tar.bz2
but got stuck now, as per http://sourceforge.net/apps/mediawiki/d ... stallation
I get error message:
-bash: ./configure: No such file or directory