Canedje
Posts: 265
Joined: Thu Mar 26, 2015 7:18 am

I don't understand dmesg message

Sun Feb 19, 2017 4:48 pm

After running dmesg command I do recieve a lot lines all telling the same.
I don't understand the message. Can somebody help?

Code: Select all

[155442.835970] w1_master_driver w1_bus_master1: Family 0 for 00.113000000000.ee is not registered.

epoch1970
Posts: 3873
Joined: Thu May 05, 2016 9:33 am
Location: Paris, France

Re: I don't understand dmesg message

Mon Feb 20, 2017 11:05 am

"S'il n'y a pas de solution, c'est qu'il n'y a pas de problème." Les Shadoks, J. Rouxel

Canedje
Posts: 265
Joined: Thu Mar 26, 2015 7:18 am

Re: I don't understand dmesg message

Mon Feb 20, 2017 12:01 pm

Thanks.
Strange because I'm not using W1 at this moment

User avatar
rpdom
Posts: 15587
Joined: Sun May 06, 2012 5:17 am
Location: Chelmsford, Essex, UK

Re: I don't understand dmesg message

Mon Feb 20, 2017 12:22 pm

If the w1 driver is loaded but no devices are connected, it will pick up phantom devices, which is what you are seeing.

Comment out the "dtoverlay=w1-gpio" line in /boot/config.txt, disable it using raspi-config or remove it from your /etc/modules (if present).

Return to “Troubleshooting”