ESP
Posts: 11
Joined: Thu Feb 21, 2013 3:22 pm

Using old PI

Tue Oct 27, 2015 1:37 pm

Hi guys,

I have an older B and followed the advice to solder the two wires for I2C.

The screen works fine. I updated and the screen is now upside down.

Adding : lcd_rotate=2

to config.txt enables the HDMI and switched off the touchscreen ???

Anybody got an ideas?

Robin

jdb
Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 2094
Joined: Thu Jul 11, 2013 2:37 pm

Re: Using old PI

Tue Oct 27, 2015 6:04 pm

1) Have you updated firmware recently? Model A / Model B support was implemented as of https://github.com/raspberrypi/firmware ... f4b1b01f23 (Oct 21st). Please post the output of vcgencmd version.
2) When you say soldered connections, what are you soldering to on the Model B board?
Rockets are loud.
https://astro-pi.org

ESP
Posts: 11
Joined: Thu Feb 21, 2013 3:22 pm

Re: Using old PI

Tue Oct 27, 2015 7:03 pm

viewtopic.php?f=108&t=120460


On mobile so difficult to post

ESP
Posts: 11
Joined: Thu Feb 21, 2013 3:22 pm

Re: Using old PI

Wed Oct 28, 2015 12:00 pm

Thanks for coming back.

pi@raspberrypi ~ $ vcgencmd version
Sep 23 2015 12:12:01
Copyright (c) 2012 Broadcom
version c156d00b148c30a3ba28ec376c9c01e95a77d6d5 (clean) (release)

Robin

Return to “Official Foundation Display”