Page 1 of 1

X on touch OpenVG on HDMI how to

Posted: Thu Oct 22, 2015 7:10 pm
by promanysyzn
Not being able to find the documentation on display time and seeing that one of the programs used 5 to access HDMI I tried 1 to 5 as the display type on the call to vc_dispmanx_display_open( screen ); This is located in the dispmanx.c file in /opt/src. 0 to 4 seem to default to going to the touch screen or default primary device. 5 puts the graphics on the HDMI monitor.