Spectre
Posts: 7
Joined: Sun Oct 18, 2015 9:31 pm
Location: Germany

Skewed Touchscreen-Glass

Thu Oct 22, 2015 9:26 am

Hi Guys,

i own a 7" RPi Touchscreen and mounted the RPi2 at the back of the Display. Actually i run the Combo standing on the Touchscreen-Glass leaning on a Cup while installing Gentoo. The Display was several Days on and get hand warm on operation.

I Experience now that the Display behind the TouchScreen-Glass skewed a little down. The Glue between Display and TouchScreen seems to retreat.

Does anyone also experienced this behavior?

User avatar
PeterO
Posts: 4882
Joined: Sun Jul 22, 2012 4:14 pm

Re: Skewed Touchscreen-Glas

Thu Oct 22, 2015 9:30 am

Sounds like the same issues described in "The screen is 'sliding' ( gap between screen and bezel )" viewtopic.php?f=108&t=121898
PeterO
Discoverer of the PI2 XENON DEATH FLASH!
Interests: C,Python,PIC,Electronics,Ham Radio (G0DZB),1960s British Computers.
"The primary requirement (as we've always seen in your examples) is that the code is readable. " Dougie Lawson

Spectre
Posts: 7
Joined: Sun Oct 18, 2015 9:31 pm
Location: Germany

Re: Skewed Touchscreen-Glass

Thu Oct 22, 2015 9:35 am

didn't found that thread. It look likes the same Problem. So, Thanks :)

User avatar
Makiese
Posts: 5
Joined: Fri Oct 23, 2015 1:00 pm
Location: Germany

Re: Skewed Touchscreen-Glass

Fri Oct 23, 2015 5:05 pm

More than 70€ for so absolutly faulty construction. :evil: Too much! I think the best is to send it back to the seller, immediately!

Return to “Official Foundation Display”