Raspberry Pi Forums

tannenba

Mostly the last suggestion.

tannenba

Much improved. Thank you. Let's mark this 'Solved'

tannenba

will try when I have some time to mess with it.

tannenba

I tried that but it still insisted on coming out the HDMI.

tannenba

Tried to force it out of the audio jack with Raspi-config, but it insisted on always coming out the HDMI. I assume the TRRS jack is the 3.5 mm audio jack on the pi? I guess there is something in the handshake with the HDMI that causes it to always output thru HDMI?

tannenba

Audio is cutting out and in. Didn't think of power supply interference. Tried several HDMI cables. Will try moving power supply. Both are plugged into a UPS.

tannenba

After an afternoon of Attic crawling, have ethernet in room for pi3.. Diabled wifi...Audio still choppy :?: :?: :?: So, took the SD card and put it in a pi2b and tried it. Still choppy??? Moved it to the other tv and not choppy??? Put the SD back in the pi3 and tried on the same tv and its ok?? The ...

tannenba

Well, apparently it is the wifi connection. Bummer. The room it is in has no ethernet connection. Also, this is a dual boot with OSMC. OSMC plays fine over wifi.??? My signal strength is ok as the TV and other devices work fine. I know what it is not also: not HDMI cable, not Bluetooth being enabled...

tannenba

I have two identically setup Raspbians loaded from NOOBS 2.8.2. One on my Visio in my Living room, plays audio smooth, one in the bedroom on a TCL Roku tv plays audio choppy. On both I went to preferences and select controls/select PCM for playback. Not sure what else to try. Note: Living room is pi...

tannenba

Well, the maintainers of the pi repositories must have changed something...both units find mahjongg now.

tannenba

Not there.

tannenba

No results

tannenba

Doesn't find anything.

tannenba

My sources .list must be wrong...apt-get can't find it: deb http://mirrordirector.raspbian.org/raspbian/ stretch main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' #deb-src http://archive.raspbian.org/raspbian/ stretch main contrib non-free rpi ********...

tannenba

Have the new Pi3 b+ and loaded the new stretch with pixel desktop. Only minecraft is included and none of the favorites are there. I especially enjoyed killing time with mahjongg and no versions are with pixel.

Joe

tannenba

I did an upgrade so I wouldn't have to redo the box. Been running since December with Stretch. This is the same way I update my Debian boxes. Since I haven't heard of rpi-update before today, did not know it was needed. I have not loaded a new card since I've gotten the older pi 3 b. I have 3 pi's m...

tannenba

Note. I am a happy camper! My fileserver (the new Pi) is at least twice of the speed on the older Pi 3 B. Also, rpi-update may have been needed since I upgraded from Jessie originally.

tannenba

See above, those cmds updated nothing, however, rpi-update fixed it.

Thank you all for the help

Joe

tannenba

Well! Saw a post about 'rpi-update' (apt-get full-upgrade updated nothing more), and and now it boots fine...Why is there no note with the new pi# B+ to do this?

tannenba

Please note. It is running my old pi 3 b now at the latest update.

tannenba

Last Saturday....I have 3 Pi's on Stretch and update cycle them on Saturdays. Can't update for the new card since the new card won't boot at all. Just has the rainbow screen with the yellow lightning bolt. It just sits there with the red light blinking and the green one not going.

tannenba

It has to be able to boot first...no? It has the latest updates as of last Sat for the Pi3

tannenba

Bought an new Pi 3 B+ and got it today. Want to replace my Pi Fileserver. moved my Raspbian Sd (Stretch) card to new one, and powered up. It brings up the rainbow screen with the yellow lightning bolt and does not boot. Red LED Blinks, green LED never flashesCheck voltage, it is 5.17 Volts without a...

tannenba

I'm monitoring a UPS and using it for a Fileserver. The only holdup on the 3b was the eithernet performance, although I would have like USB 3,0. I have heat sinks on the 3b and a standard case from the 2B which is pretty open. I can feel heat coming off of it though.

tannenba

So should we use heat sinks with the new board?

Search found 43 matches

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Re: Choppy audio

Choppy audio

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: STICKY: GAMES LIST: Games That Work On The Pi

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Re: Help please--New Pi3 B+

Help please--New Pi3 B+

Re: Heat Sinks on the new 3Bplus?

Heat Sinks on the new 3Bplus?