Go to advanced search

by notholmen
Thu Nov 24, 2016 9:07 am
Forum: Troubleshooting
Topic: Powered USB do not enumerate devices.
Replies: 1
Views: 701

Re: Powered USB do not enumerate devices.

Anyone with any idea?
by notholmen
Mon Nov 21, 2016 5:29 pm
Forum: Troubleshooting
Topic: Port 22 connection refused (SSH)
Replies: 2
Views: 4744

Re: Port 22 connection refused (SSH)

Just to be sure, try this:

Code: Select all

sudo apt install openssh-server
That should install and or fix any issues with the SSH server (if any from an installation perspective)
by notholmen
Mon Nov 21, 2016 11:27 am
Forum: Troubleshooting
Topic: Powered USB do not enumerate devices.
Replies: 1
Views: 701

Powered USB do not enumerate devices.

Hi. I just bought a powered USB hub to run my Raspberry B+ and to power two external HDD's (2.5") It was a smooth ride to plug in all devices except the last (biggest and oldest HDD) WD 2.0. The USB hub purchased: https://www.amazon.de/gp/product/B00QM89U4G/ The raspberry is now powered through one ...
by notholmen
Wed Nov 16, 2016 5:26 pm
Forum: General discussion
Topic: SSD1306 OLED headless system monitor
Replies: 30
Views: 16570

Re: SSD1306 OLED headless system monitor

Hey guys, I'm super happy that I found this script! It's exactly what I have been looking for! - I'll also add my small code snippet to show last few messages of syslog output. * But first, I'm having issues getting lib_oled96 installed. Any one else has this issue? Do you have any clue what it coul...
by notholmen
Sat May 14, 2016 11:40 pm
Forum: Troubleshooting
Topic: WiFi ONLY works if Ethernet is plugged in
Replies: 57
Views: 34468

Re: WiFi ONLY works if Ethernet is plugged in

Okay, So I need to try asking again since no suggestion either work or I'm just doing it very wrong. Connection to the pi only works with the ethernet plugged in and I believe it's something with the routing. Even tried addint another WiFi USB... didn't work.. :cry: Please see my settings: /etc/netw...
by notholmen
Sat Apr 02, 2016 7:36 am
Forum: Troubleshooting
Topic: WiFi ONLY works if Ethernet is plugged in
Replies: 57
Views: 34468

Re: WiFi ONLY works if Ethernet is plugged in

If anyone has succeeded in getting WiFi to work without plugging in Ethernet, I would appreciate a more precise explanation. With the default setup, I either connect using the wifi applet on the desktop or put the appropriate network block in /etc/wpa_supplicant/wpa_supplicant.conf myself and it ju...
by notholmen
Wed Mar 30, 2016 8:08 pm
Forum: Troubleshooting
Topic: WiFi ONLY works if Ethernet is plugged in
Replies: 57
Views: 34468

Re: WiFi ONLY works if Ethernet is plugged in

If you're going to do all your stuff in /etc/network/interfaces you should purge the raspberrypi-net-mods package. ... Thanks! I tried to find that package but I believe that it's not installed by default on Minibian which I'm running? I don't even have dhcpd.conf in /etc/ Thanks for all of your ti...
by notholmen
Sat Mar 19, 2016 2:40 pm
Forum: Troubleshooting
Topic: WiFi ONLY works if Ethernet is plugged in
Replies: 57
Views: 34468

Re: WiFi ONLY works if Ethernet is plugged in

Hi everyone... I have the same problem as everyone else in here... I have an "old" minibian installation from a Pi B+ moved to a Pi 2 B which is why I have several ethX devices, still all should be DHCP, right? uname -a Linux sniff 4.1.19-v7+ #853 SMP Wed Mar 9 18:09:16 GMT 2016 armv7l GNU/Linux The...
by notholmen
Sat Jul 04, 2015 12:58 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: 1-wire troubles
Replies: 19
Views: 3344

Re: 1-wire troubles

Just some updates: Having both plugged in and trying to read the sensor the logs give me: Jul 4 14:54:25 hemulen kernel: [1131311.735899] w1_slave_driver 28-00000002b4ac: Read failed CRC check Jul 4 14:54:28 hemulen kernel: [1131315.185818] w1_slave_driver 28-00000733b4ac: Read failed CRC check Jul ...
by notholmen
Sat Jul 04, 2015 12:19 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: 1-wire troubles
Replies: 19
Views: 3344

1-wire troubles

Hi, Hello! Some assistance needed. I'm using Pi B+ and have followed this http://www.modmypi.com/blog/ds18b20-one-wire-digital-temperature-sensor-and-the-raspberry-pi guide to connect and read 1-wire directly to the GPIO 4. Reading my two 1-wire DS18B20 sensors work great when the sensors are attach...
by notholmen
Thu Feb 05, 2015 12:46 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: ~ $ gpio reset - Raspberry won't boot
Replies: 6
Views: 865

Re: ~ $ gpio reset - Raspberry won't boot

Thank you! I'll look into this as soon as I get hold or access to the memmory card! If fixing it on site it will be an OS X system, But I'll use search engines to find out how. Thanks again! OT: I' have actually already for several reasons replaced my big ESXi (Xeon Quad, 24GB, 8hdd RAID) server wit...
by notholmen
Thu Feb 05, 2015 7:40 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: ~ $ gpio reset - Raspberry won't boot
Replies: 6
Views: 865

Re: ~ $ gpio reset - Raspberry won't boot

Thank you!
I'll definitively get this going then... Might even try to get access to the memory card remotely as it contains some critical information (weather data for two years back).

Any where I can get information about the "dirty bit" and how to mend it?
by notholmen
Wed Feb 04, 2015 10:19 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: ~ $ gpio reset - Raspberry won't boot
Replies: 6
Views: 865

Re: ~ $ gpio reset - Raspberry won't boot

Thank you DougieLawson, that is a great solution to the problem.
I'm just curious to hear if there is or someone know of a reason why exactly this command make the little PI not booting properly.
by notholmen
Wed Feb 04, 2015 6:43 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: ~ $ gpio reset - Raspberry won't boot
Replies: 6
Views: 865

~ $ gpio reset - Raspberry won't boot

Hello everyone! I'm aware that this topic might be on the verge of being "it won't boot what's wrong" topic. I'll do my best to steer away from it. I have had some issues earlier with interfacing through an 1-wire board It never worked after an upgrade from a Rpi B v.1 to a Rpi B+. In order for it t...
by notholmen
Sun Jan 04, 2015 1:53 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

Re: OWFS not mounting with 1-wire expansion board

Thanks! Great hear someone that has been in the same situation. I have literally spent days in trying to get this to work. Can you post the owfs commands you are using to mount your device? The memory banks are unfuzzing, and this may be a mount configuration issue. It should be started with "start1...
by notholmen
Sat Jan 03, 2015 8:18 pm
Forum: Other projects
Topic: Extending SD card on non+ version? - No more!
Replies: 0
Views: 310

Extending SD card on non+ version? - No more!

WARNING and Disclaimer: I`m not responsible for any damages done to either your Raspberry or to your SD card. - Take a backup! I just sat and fiddled around with an old SD card that has been used for my very old Raspberry Pi B v1. Both the raspberry and the card have for separate reasons stopped wo...
by notholmen
Tue Dec 30, 2014 2:49 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

Re: OWFS not mounting with 1-wire expansion board

Up...
Please let me know and point me in the right direction if this is not the right part of the forum for this type of question!
by notholmen
Sat Dec 27, 2014 2:28 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

Re: From B rev1 model to B+ 1-wire expansion board

Hello Everyone, Happy holidays! After some time testing and re-testing building OWFS and even testing OWFS on a clean image still not getting int working. I have concluded that there must be some problem with something else. I'm beginning to think that the add-on board has failed? I'm greatful to an...
by notholmen
Thu Nov 13, 2014 1:55 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

Re: From B rev1 model to B+ 1-wire expansion board

Hello rpdom, Thank you for looking into the sourcecode for me! Even though I have fiddled around with Raspberries and Linux systems for years I have never coded/ looked in to source code. To me it is strange that the reinstallation don't seem to update to a working installation especially if it auto...
by notholmen
Thu Nov 13, 2014 8:45 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

Re: From B rev1 model to B+ 1-wire expansion board

Yes, Thanks! That is obviously a preferred solution. Unfortunately I can't find the settings where to change this reading pin in the OWFS software and can't remember I ever set that initially. Thus leaving me without a clue on how to mend my little problem. Is the solution to go in to the sourcecode...
by notholmen
Wed Nov 12, 2014 5:44 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: OWFS not mounting with 1-wire expansion board
Replies: 15
Views: 7315

OWFS not mounting with 1-wire expansion board

Edit: Read from this post (below) http://www.raspberrypi.org/forums/viewtopic.php?p=660362#p660362 Hello everyone! I'm currently using one of my PI's as a weather station. ( http://weather.lagus.net ) As some can see I bought the very first B model that was released and have been running that partic...
by notholmen
Sat Dec 14, 2013 8:45 pm
Forum: Graphics, sound and multimedia
Topic: PulseAudio - Network Sink - Constant Buffer Underrun.
Replies: 5
Views: 4808

Re: PulseAudio - Network Sink - Constant Buffer Underrun.

Is this the right forum for this kind of question?
by notholmen
Sun Dec 08, 2013 9:18 pm
Forum: Graphics, sound and multimedia
Topic: PulseAudio - Network Sink - Constant Buffer Underrun.
Replies: 5
Views: 4808

Re: PulseAudio - Network Sink - Constant Buffer Underrun.

*bump*
Maybe you know a better place to ask this specific questions?
by notholmen
Sat Dec 07, 2013 4:07 pm
Forum: Troubleshooting
Topic: Network Access
Replies: 5
Views: 805

Re: Network Access

Check what local IP ranges there really are. I think you got some of them wrong.
Also I tend to prefer to make a static DHCP lease from the router instead of locking any computer to a static IP.

A list of local IP ranges:
http://www.noah.org/wiki/Private_LAN_IP_addresses

Go to advanced search