Go to advanced search

by Gazzy
Mon Oct 28, 2019 9:47 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Hey, I found something, with the new boot eeprom Firmwares. On my buster install, the temperature barely gets to 60 c it sits mostly around 55 c and no longer turns on the fan shim, and probably has no need for a fan much anymore. I ran 1080p video and still didn’t have temps reaching 65 to turn the...
by Gazzy
Mon Oct 28, 2019 2:20 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Hey Sakaki, I was doing a bit of updating and added the patcher for Rpi-eeprom updater. I added it both to my buster card and my gentoo card, and all seemed to go well A note on the latest update, Using the pimoroni fan shim, I noticed straight away that the fan starts spinning, after shutdown on bo...
by Gazzy
Mon Oct 28, 2019 1:40 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

I use 5ghz wifi, and have had no problems. I had found you need to make sure the reg domain, is set and effective. Files effecting reg domain are listed earlier in the pages of this thread. Gazzy I would suggest his problem is the reg domain, reverting to 00 5ghz wifi is blacklisted, until your reg ...
by Gazzy
Sun Sep 15, 2019 5:40 am
Forum: General discussion
Topic: Small piwiz race condition (time sync)
Replies: 25
Views: 1022

Re: Small piwiz race condition (time sync)

I experienced the same error cycle, as I installed a new micro sd with buster. 10 July. As the problem, may be a time/server issue I’m not fully sure, as many setting, and updates are not yet complete, locale, zone, time ect. Including your local mirror. I also found when setting up the lrg install ...
by Gazzy
Mon Sep 02, 2019 12:25 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re 1.51

Hi Sakaki I installed and tested the new 1.51 image. Everything went smooth. Wifi worked with pyconfig, no edits needed. Switching locale still stopped pyconfig, so I made a new user, after switching locale, and pyconfig works fine for the new user. Fanshim patch in config.txt works well, So we coul...
by Gazzy
Sun Sep 01, 2019 10:59 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Sakaki,

Ok, that emerge was quick.

Thank you for all your help

Gazzy
by Gazzy
Sat Aug 31, 2019 2:09 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Hey Sakaki, So I got all the upgrading done, and everything works well. The new kernel files may be a tad faster. I still needed to reach in and set the regdom, as the update wanted to reset it to GB. I did the genup, about three times as porthole kept finding new files, and some won’t be done by po...
by Gazzy
Sat Aug 31, 2019 4:11 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

[binary U ] dev-python/setuptools-41.2.0 [41.0.1] PYTHON_TARGETS="python3_7*" [binary R ] app-portage/gemato-14.1 PYTHON_TARGETS="python3_7*" [binary U ] sys-apps/portage-2.3.72 [2.3.71] PYTHON_TARGETS="python3_7*" [blocks B ] <app-portage/gentoolkit-0.4.6 ("<app-portage/gentoolkit-0.4.6" is blocki...
by Gazzy
Thu Aug 29, 2019 12:51 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: gentoo fix

This opens the window in AU locale, this is the output demouser@pi64 ~ $ sudo pyconfig_gen [E] Invalid device/display ID [E] Invalid device/display ID then the window opens. This is as root pi64 /home/demouser # pyconfig_gen [E] Invalid device/display ID [E] Invalid device/display ID Traceback (most...
by Gazzy
Thu Aug 29, 2019 12:44 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

It changes back to working after I do

sudo locale-gen

with GB in the local.gen file

if I put AU it stops working


Its a real mystery to me everything looks the same, for both locales.

Gazzy
by Gazzy
Thu Aug 29, 2019 12:40 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

no lower case did not seem to help it stops working as soon as i do the eselect locale set 6 line demouser@pi64 ~ $ eselect locale show LANG variable in profile: en_AU.utf8 demouser@pi64 ~ $ locale LANG=en_AU.utf8 LC_CTYPE="en_AU.utf8" LC_NUMERIC="en_AU.utf8" LC_TIME="en_AU.utf8" LC_COLLATE=C LC_MON...
by Gazzy
Thu Aug 29, 2019 12:21 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

I can notice that these Directories are different
version 1
XDG_CONFIG_DIRS=/etc/xdg:/etc/xdg


version2
XDG_CONFIG_DIRS=/etc/xdg


but i dont know what it means
Thanks
Gazzy
by Gazzy
Thu Aug 29, 2019 12:14 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

sakaki yes, when i revert back to GB, the pyconfig_gen starts to work again from the drop down menu. here is my reverted env if it helps. demouser@pi64 ~ $ env SHELL=/bin/bash SESSION_MANAGER=local/pi64:@/tmp/.ICE-unix/2411,unix/pi64:/tmp/.ICE-unix/2411 WINDOWID=56623107 COLORTERM=truecolor XDG_CONF...
by Gazzy
Thu Aug 29, 2019 12:03 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: gentoo env

hey, sakaki here is my env demouser@pi64 ~ $ env SHELL=/bin/bash SESSION_MANAGER=local/pi64:@/tmp/.ICE-unix/2412,unix/pi64:/tmp/.ICE-unix/2412 WINDOWID=56623107 COLORTERM=truecolor XDG_CONFIG_DIRS=/etc/xdg:/etc/xdg LESS=-R -M --shift 5 XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0 XDG_ME...
by Gazzy
Wed Aug 28, 2019 1:48 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

This is a exerpt of my install script, i dont know if I made any mistakes #!/sbin/openrc-run depend() { need net } name=fanshim command="$(pwd)/automatic.py" command_args="--on-threshold $ON_THRESHOLD --off-threshold $OFF_THRESHOLD --delay $DELAY --brightness $BRIGHTNESS $EXTRA_ARGS" command_user="r...
by Gazzy
Wed Aug 28, 2019 1:22 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

That’s fine, I think it sets that rpi3 file anyway, as it didn’t fail on the terminal. ( all other combos failed with an error. ) If you can think of a way, you should paste your changes, or a small guide on how to install the fanshim software, rpi4s get quite hot and I think the fanshim is a good s...
by Gazzy
Wed Aug 28, 2019 12:47 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Are you packing the new bis kernels into 1.51, I hope so, And also a new set of startx4* and fixup4* Files, as I hope we get all the bugs ironed Out so it boots first time, I reinstalled 1.5 a lot, as I haven’t used Linux or gentoo for a few years, so I have been practicing a bit, trying to get it a...
by Gazzy
Wed Aug 28, 2019 12:08 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Following the guides, I change the keyboards, by editing conf.d/keymaps xorg.conf.d/00keyboard.conf #restart to enable keys. Then edit local.gen # and I just change GB to my country code #Then local.gen eselect local list eselect local set 6 # then update ~/.bashrc , and also ~/.profile #With export...
by Gazzy
Wed Aug 28, 2019 11:17 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Ok sounds good. Do you know at all why I can’t open pyconfig_gen, from the drop down menu It works fine until I change locale, away from GB, then it won’t open anymore from the menu And I have to use the terminal to issue sudo pyconfig_gen And it opens but gives these errors. [E] Invalid device/disp...
by Gazzy
Wed Aug 28, 2019 10:54 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

I looked it up on the web, It did change the region in /etc/conf.d/rpi3-wifi-regdom But that file did not switch the regdom from 00 blocked status. I’m trying any other combinations, but none are showing a fix. So far that file addition in /etc/mod probe.d/ Is the regdom the restriction is looking f...
by Gazzy
Wed Aug 28, 2019 10:13 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

I just tried to use sudo iw reg set WIFI_REGDOM=“US” And it did not work, it would not change the region, and after changing region with sudo iw reg set US It would not retain the region setting after reboot. Wifi 5ghz would stay blacklisted In region 00 I still have the module method I can reinstal...
by Gazzy
Wed Aug 28, 2019 5:11 am
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Edits and fixes

So Sakaki, I got the Clock Skew messages at boot and shutdown to stop, by using a fix from this website. https://gitlab.alpinelinux.org/alpine/aports/issues/8093 his method, updates the date clock on /etc/init.d from the swclock file during boot, so the clock skew check is satisfied. could I also su...
by Gazzy
Tue Aug 27, 2019 9:19 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

hey by the way

do you have a fix for the

clock skew detected at boot, and sometimes shutdown,

I searched a lot but found no solution, that actually fixes it.

Thanks for the help
Gazzy
by Gazzy
Tue Aug 27, 2019 9:16 pm
Forum: Gentoo
Topic: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)
Replies: 353
Views: 85710

Re: Updated 64-bit Gentoo Image for RPi3 Released (now also for RPi3B+ and RPi4B)

Hey Sakaki You work miracles. That fixed up all the audio, straight after reboot. The YouTube plays now with no errors. And the mp3 has stopped shuddering in the first few seconds. And no more static. I think I saw a post about tsched but I had not got near making it work. You are amazing at fixing ...

Go to advanced search