Go to advanced search

by Max_G
Fri Feb 15, 2019 6:33 am
Forum: Troubleshooting
Topic: Stretch: extend partition and file system w/o loosing data
Replies: 3
Views: 187

Re: Stretch: extend partition and file system w/o loosing data

gparted is a graphical interface (GUI).

Edited my post, and added "headless" rPi.
Hence, some command line tools have to do the trick.
Would appreciate, based on the data provided (and am happy to provide more if required), an idea on how to perform the necessary commands.
by Max_G
Fri Feb 15, 2019 5:36 am
Forum: Troubleshooting
Topic: Stretch: extend partition and file system w/o loosing data
Replies: 3
Views: 187

Stretch: extend partition and file system w/o loosing data

I have set-up a headless rPi3+ with Stretch Lite; burned the image with Ether to a 16GB SD card; extended the partition to 16GB. USed Etcher to grapb this image and burned it to a 240GB SSD. What do I need to do to use the entire SSD? More so, without loosing the data on it if possible). df -h Files...
by Max_G
Thu Dec 27, 2018 9:27 pm
Forum: Troubleshooting
Topic: Copy SD card to SDD? Etcher?
Replies: 4
Views: 293

Re: Copy SD card to SDD? Etcher?

Thanks...
What I ended up doing, (for the benefit of others)...

Used DiskImager on Windows to read the SD card to an image, and then wrote this image to the SSD.
Plug SSD into rPi3B+... all working!

Happy New Year :)
by Max_G
Thu Dec 27, 2018 12:02 pm
Forum: Troubleshooting
Topic: Copy SD card to SDD? Etcher?
Replies: 4
Views: 293

Re: Copy SD card to SDD? Etcher?

Well, had to search a bit for the copier... and found it here: https://www.raspberrypi.org/blog/anothe ... -raspbian/

However, I only have Stretch Lite installations, and the copier is part of the desktop so it seems.

Maybe I try option b) of my initial post and see what happens. :)
by Max_G
Thu Dec 27, 2018 11:33 am
Forum: Troubleshooting
Topic: Copy SD card to SDD? Etcher?
Replies: 4
Views: 293

Copy SD card to SDD? Etcher?

I have set-up a rPi 3 installed and configured some software on it. I now want to use this set-up on a rPi3B+ with a SSD. I have checked that the 3B+ accepts the SSD by using Etcher to put Stretch on the SSD, and connecting the SSD to the rPi3B+ and it boots of it. I now want to copy the SD card to ...
by Max_G
Sun May 20, 2018 4:35 am
Forum: Troubleshooting
Topic: How to get rid of NOOBS
Replies: 8
Views: 739

Re: [Solved] Pi 3 not booting from USB SSD

Once an issue is solved (closed), it is better to create a new post... in particular when the issue a different one.

However, my answer to your question is:

I have cloned my SD card to USB with rpi clone.
It is easy to use, works spot on!
Give it a shot: https://github.com/billw2/rpi-clone
by Max_G
Fri May 18, 2018 11:56 pm
Forum: Troubleshooting
Topic: [Solved] Pi 3 not booting from USB SSD
Replies: 2
Views: 804

Re: Pi 3 not booting from USB SSD

Thank you... the links helped. I tried bootcode.bin on an empty SD card; did not work. Added a timeout (just an empty) file; no change (did not work). Reading through the links, and I realised the SSD start-up is the culprit. Plugged a powered USB hub into the Pi3. Connected the SSD to the USB. Fire...
by Max_G
Fri May 18, 2018 12:26 pm
Forum: Troubleshooting
Topic: [Solved] Pi 3 not booting from USB SSD
Replies: 2
Views: 804

[Solved] Pi 3 not booting from USB SSD

The OTP is set, the Pi 3 boots from a USB stick, all working fine. I have cloned the USB stick to a 64 GB drive with a SATA adaptor with split USB/power connectors. The Pi does not even blink after it would usually boot from the stick. Bought a WD green 240GB and Onrico enclosure. It has a USB3 conn...
by Max_G
Sat May 05, 2018 5:59 am
Forum: Troubleshooting
Topic: [Solved] rPi3 on USB drive: What is constantly accessing the drive?
Replies: 1
Views: 234

Re: rPi3 on USB drive: What is constantly accessing the drive?

Have installed iotop and atop and found the process causing it.

It was daemontools looking for a service I had yet not created; I had created the directory, but not he run file; it seems it was looking for it, and thinking to long what to do next. :)

Anyway... problem solved.
by Max_G
Sat May 05, 2018 5:24 am
Forum: Troubleshooting
Topic: [Solved] rPi3 on USB drive: What is constantly accessing the drive?
Replies: 1
Views: 234

[Solved] rPi3 on USB drive: What is constantly accessing the drive?

I made a rPi3 bootable from USB drive... all good... it runs Stretch. The image is stock standard; with my user added to dialout for serial access. I have written a python script to read from the serial port and write to disk every second. This will create a short blib on the USB drive for the write...
by Max_G
Fri Feb 02, 2018 10:33 am
Forum: Troubleshooting
Topic: [Solved] Changed ISPs, changed DNS servers in dnsmasq: no longer resolving
Replies: 1
Views: 486

Re: Changed ISPs, changed DNS servers in dnsmasq: no longer resolving

After mucking about for 4 hours :( I did a sudo service --status-all [ - ] alsa-utils [ + ] apache2 [ + ] bind9 [ - ] bootlogs [ - ] bootmisc.sh [ - ] cgmanager [ - ] cgproxy [ - ] cgroup-bin [ - ] checkfs.sh [ - ] checkroot-bootclean.sh [ - ] checkroot.sh [ + ] console-setup [ + ] cron [ + ] dbus [...
by Max_G
Fri Feb 02, 2018 8:42 am
Forum: Troubleshooting
Topic: [Solved] Changed ISPs, changed DNS servers in dnsmasq: no longer resolving
Replies: 1
Views: 486

[Solved] Changed ISPs, changed DNS servers in dnsmasq: no longer resolving

I am running a Pi on Jessi v8 It runs dnsmasq, DHCP and Squid proxy; and was running fine, until this afternoon. I changed ISPs. The services works, and was tested with a Windows 10 PC with manually configured IP v4 using the new ISPs DNS server. However, the rPi stopped resolving domain names; whic...
by Max_G
Sat Jun 10, 2017 7:07 am
Forum: Troubleshooting
Topic: dnsmasq problem after upgrading wheezy to jessie
Replies: 6
Views: 1227

Re: dnsmasq problem after upgrading wheezy to jessie

Thanks :) as for interface address and listen address: Listen on the given IP address(es). Both --interface and --listen-address options may be given, in which case the set of both interfaces and addresses is used. Note that if no --interface option is given, but --listen-address is, dnsmasq will no...
by Max_G
Thu Jun 08, 2017 9:40 pm
Forum: Troubleshooting
Topic: dnsmasq problem after upgrading wheezy to jessie
Replies: 6
Views: 1227

Re: dnsmasq problem after upgrading wheezy to jessie

I am using the isc-DHCP service; and later required a DNS proxy, when I installed dnsmasq. IT was working fine, until I made the upgrade from Wheezy to Jessie. :?
Have googled this problem, but can't find a solution.
by Max_G
Thu Jun 08, 2017 10:11 am
Forum: Troubleshooting
Topic: dnsmasq problem after upgrading wheezy to jessie
Replies: 6
Views: 1227

Re: dnsmasq problem after upgrading wheezy to jessie

Thanks...

I should have posted the config...

Code: Select all

grep -E -v '(^$)|(^#)' /etc/dnsmasq.conf
domain-needed
bogus-priv
local=/localnet.beta.net/
server=180.181.12.3
server=180.181.12.4
interface=eth0
listen-address=127.0.0.1
no-dhcp-interface=
expand-hosts
domain=alpha.org
by Max_G
Wed Jun 07, 2017 11:19 am
Forum: Troubleshooting
Topic: dnsmasq problem after upgrading wheezy to jessie
Replies: 6
Views: 1227

dnsmasq problem after upgrading wheezy to jessie

I have upgraded my rPi2 from wheezy to jessie... it boots and seems OK, except dnsmasq fails after boot with: sudo service dnsmasq status ● dnsmasq.service - dnsmasq - A lightweight DHCP and caching DNS server Loaded: loaded (/lib/systemd/system/dnsmasq.service; enabled) Drop-In: /run/systemd/genera...
by Max_G
Thu Feb 16, 2017 10:30 pm
Forum: Troubleshooting
Topic: rPi3 fresh install, no ssh connection via wired Ethernet
Replies: 7
Views: 2091

Re: rPi3 fresh install, no ssh connection via wired Ethernet

Thanks for trying... port 22 is open... adding the empty file 'ssh' works, as I have proven on another rPi.
It must be something else.
by Max_G
Thu Feb 16, 2017 1:06 pm
Forum: Troubleshooting
Topic: rPi3 fresh install, no ssh connection via wired Ethernet
Replies: 7
Views: 2091

rPi3 fresh install, no ssh connection via wired Ethernet

Pulled a fresh rPi3 out of the cupboard and installed JessieLight (2017) on it. Added the file 'ssh' to the root of the sd card to enable the by default disabled ssh; put the SD into the Pi, network cable and power; red LED on, green blinking... rPi3 acquired IP address via DHCP; I can ping it, nmap...
by Max_G
Wed Sep 21, 2016 12:21 pm
Forum: Troubleshooting
Topic: ttyUSB not created when plugging in USB devices
Replies: 5
Views: 13127

Re: ttyUSB not created when plugging in USB devices

:) this worked... Sep 21 16:55:57 rpi31 kernel: [69223.995362] usbcore: registered new interface driver usbserial Sep 21 16:55:57 rpi31 kernel: [69223.996941] usbcore: registered new interface driver usbserial_generic Sep 21 16:55:57 rpi31 kernel: [69223.997521] usbserial: USB Serial support registe...
by Max_G
Wed Sep 21, 2016 11:45 am
Forum: Troubleshooting
Topic: ttyUSB not created when plugging in USB devices
Replies: 5
Views: 13127

Re: ttyUSB not created when plugging in USB devices

Thank you kindly... I got a step further with: sudo modprobe ftdi_sio ... which created the directory under /sys/bus/usb-serial/drivers then echo 0403 8508 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id which resulted in sudo echo 0403 8508 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id -bash: /sys/bus/...
by Max_G
Wed Sep 21, 2016 5:45 am
Forum: Troubleshooting
Topic: ttyUSB not created when plugging in USB devices
Replies: 5
Views: 13127

ttyUSB not created when plugging in USB devices

Running Raspbian GNU/Linux, V8 (jessie) on a new rPi3. I am connecting a USB-serial device via USB. The device shows up under lsusb: Bus 001 Device 004: ID 0403:8508 Future Technology Devices International, Ltd Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet ...
by Max_G
Tue Sep 20, 2016 9:43 am
Forum: Troubleshooting
Topic: STICKY: Pi3 UART stopped working? Read this.
Replies: 49
Views: 86634

Re: Pi3 UART stopped working? Read this.

It's either because ttyAMA0 is the more capable UART with larger FIFOs and a clock which is immune to core frequency changes, or because we hate you - pick whichever suits your world view. Well put... thanks! This clearly demonstrates that I should not be talking about things I do not understand. A...
by Max_G
Mon Sep 19, 2016 12:26 pm
Forum: Troubleshooting
Topic: STICKY: Pi3 UART stopped working? Read this.
Replies: 49
Views: 86634

Re: Pi3 UART stopped working? Read this.

I am gob smacked... just bought 2 Pi3 to run a python script reading serial via USB and it does not work... As a matter of principle: why would anyone implement a change like this? Instead of giving Bluetooth a new serial port rather than using an existing one and breaking backwards compatibility? T...
by Max_G
Thu Jun 16, 2016 10:42 am
Forum: Troubleshooting
Topic: rPi does not see new SDD
Replies: 9
Views: 1082

Re: rPi does not see new SDD

[*You were right on the money!!*] Now I can see the drive... I remembered I had one of these multi-drive bays with their own 12V power source. Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 8192 137215 129024 63M c W95 FAT32 (LBA) /dev/mmcblk0p2 137216 15130623 14993408 7.2G 83 Linux Disk...
by Max_G
Thu Jun 16, 2016 10:33 am
Forum: Troubleshooting
Topic: rPi does not see new SDD
Replies: 9
Views: 1082

Re: rPi does not see new SDD

Thank you for your input! :)
I have one of these coming soon:
http://www.ebay.com.au/itm/281719288395 ... EBIDX%3AIT

I will revive this post once I have the alternative (USB2) connection!

Go to advanced search