Go to advanced search

by CostasVav
Thu Feb 16, 2017 4:05 pm
Forum: Beginners
Topic: STICKY: Using a Gert VGA 666 adapter - [HOWTO]
Replies: 199
Views: 212358

Re: Using a Gert VGA 666 adapter - [HOWTO]

So I plugged the Gert666 into a new RPi 3B and the image quality was much better than the RPi A+. Nothing else was changed. It still wasn't good enough for me (still a slight noise level), so I switched to an HDMI-to-VGA adapter instead for best quality. There must be something about the A+ giving ...
by CostasVav
Mon Feb 13, 2017 8:52 pm
Forum: Beginners
Topic: STICKY: Using a Gert VGA 666 adapter - [HOWTO]
Replies: 199
Views: 212358

Re: Using a Gert VGA 666 adapter - [HOWTO]

So I plugged the Gert666 into a new RPi 3B and the image quality was much better than the RPi A+. Nothing else was changed. It still wasn't good enough for me (still a slight noise level), so I switched to an HDMI-to-VGA adapter instead for best quality. There must be something about the A+ giving o...
by CostasVav
Sat Feb 11, 2017 2:03 am
Forum: Other projects
Topic: PiMac Project
Replies: 4
Views: 2498

Re: PiMac Project

Couldn't get the big fan to work by attempting a PWM signal with WiringPi. I don't have any way to test that the signal was correct or anything, so I gave up. I just moved the middle fan to blow over the Pi and PSU. No overheating issues yet.
by CostasVav
Wed Feb 08, 2017 7:44 pm
Forum: Other projects
Topic: PiMac Project
Replies: 4
Views: 2498

PiMac Project

Hi All, I would like to share my experience building a custom iMac using a Raspberry Pi 3 as the new motherboard. I still have some quirks to fix, but it works very well already! Build Info: 2008 iMac Original 20" LCD Original power supply Original fans Original speakers Raspberry Pi 3 ($39) LVDS co...
by CostasVav
Sat Feb 04, 2017 2:15 am
Forum: Beginners
Topic: STICKY: Using a Gert VGA 666 adapter - [HOWTO]
Replies: 199
Views: 212358

Re: Using a Gert VGA 666 adapter - [HOWTO]

I have just got my Gerts VGA666 plugged in and working. I initially tested on a RPi3 with very good results. When I was attempting to fit the RPi3 into my project, I accidentally fried it (it touched a live 110VAC wire... Don't ask). I then tested it on an old RPi A+ (all I have laying around). The ...
by CostasVav
Sat Sep 24, 2016 8:17 pm
Forum: HATs and other add-ons
Topic: Power draw spike at startup causing reboot
Replies: 4
Views: 1348

Re: Power draw spike at startup causing reboot

I solved the issue for now with two charging circuits in parallel.

However, there should be a capacitor somewhere that could power 5V ~500mA for ~200ms. I was just wondering what that particular spike was. Has anyone else encountered this spike?

But I guess I will call this issue closed for now.
by CostasVav
Sat Sep 24, 2016 8:13 pm
Forum: HATs and other add-ons
Topic: Adafruit Powerboosts in parallel, possible?
Replies: 1
Views: 518

Re: Adafruit Powerboosts in parallel, possible?

Tested a Powerboost 1000 Charger in parallel with a Powerboost 500 Basic, works perfectly. Have both hooked up to a switch to power on both at the same time.
by CostasVav
Sat Sep 24, 2016 1:53 am
Forum: HATs and other add-ons
Topic: Adafruit Powerboosts in parallel, possible?
Replies: 1
Views: 518

Adafruit Powerboosts in parallel, possible?

Hi, I was wondering if I could connect a Powerboost 1000 Charger in parallel with a Powerboost 500 Basic. I know it is possible to hook two Basics in parallel to provide more power to a project. Given only one circuit is charging, could this work? Would it need any extra circuitry, like diodes or an...
by CostasVav
Sat Sep 24, 2016 1:47 am
Forum: HATs and other add-ons
Topic: Power draw spike at startup causing reboot
Replies: 4
Views: 1348

Power draw spike at startup causing reboot

Hi, I have a RPi2 powered by an Adafruit Powerboost 1000 Charger and a 6600mAh 3-cell Li-ion battery. Whenever I start the RPi2 on a normal 2A USB charger, I do notice a current draw spike at about 2-3 seconds after startup, causing the rainbow box to appear for a split second in the top-right corne...
by CostasVav
Sat Aug 13, 2016 2:18 am
Forum: Beginners
Topic: Start remote Python/TK script from SSH
Replies: 0
Views: 451

Start remote Python/TK script from SSH

Hi All,

I am looking to SSH into my RPi and execute a Python script that includes Tkinter graphical elements. I want the script to display on the Adafruit 5" LCD that is attached to it through HDMI. Is this easy to achieve?

Thanks!
by CostasVav
Tue Jul 28, 2015 7:03 pm
Forum: Camera board
Topic: Correct Gstreamer1.0 commands on Linux client
Replies: 2
Views: 908

Re: Correct Gstreamer1.0 commands on Linux client

Weird, I already had it installed and it just started working after you posted that. I guess everything is broken until you ask how to fix it. :roll:
by CostasVav
Mon Jul 27, 2015 8:01 pm
Forum: Camera board
Topic: Correct Gstreamer1.0 commands on Linux client
Replies: 2
Views: 908

Correct Gstreamer1.0 commands on Linux client

Hi all, I have been busy working on my project and am stuck on an issue that should not be an issue. What is the correct Gstreamer1.0 command on the receiving end? Every single article/post/email contains a different iteration of the same wrong pipeline that no longer works. I would think this would...
by CostasVav
Mon Jul 27, 2015 7:43 pm
Forum: Camera board
Topic: another R-Pi camera accessory: M12 adaptor
Replies: 1
Views: 587

Re: another R-Pi camera accessory: M12 adaptor

Since they are out of stock on that site, I bought a pair off Ebay for $4 each. Even though they are labeled "21mm for Raspberry Pi", they do not fit correctly. 1/2mm off. Plus they do not have a cutout for the little "SUNNY" ribbon.

Be warned!
by CostasVav
Tue Jul 14, 2015 1:22 pm
Forum: Beginners
Topic: Setup Raspbian on a different Pi
Replies: 4
Views: 660

Re: Setup Raspbian on a different Pi

Excellent! Thanks!
by CostasVav
Mon Jul 13, 2015 9:27 pm
Forum: Beginners
Topic: Setup Raspbian on a different Pi
Replies: 4
Views: 660

Setup Raspbian on a different Pi

Question: I have a RPi2 and a RPiA+. Given the A+ only has a single USB and no ethernet, setting up a Wifi dongle had led to a dead end without a USB hub. Is it possible to setup an SD card with the needed dongle drivers and config files on my RPi2 then just pop it into my RPiA+? Would Apt-get mess ...
by CostasVav
Wed Jul 08, 2015 4:07 pm
Forum: For sale
Topic: [SOLD]: RPi2, Cameras and Accessories
Replies: 3
Views: 1411

Re: For Sale: RPi2, Cameras and Accessories

Sorry about delay, the items are no longer for sale.
by CostasVav
Mon Jun 01, 2015 3:12 pm
Forum: For sale
Topic: [SOLD]: RPi2, Cameras and Accessories
Replies: 3
Views: 1411

[SOLD]: RPi2, Cameras and Accessories

Update: Items no longer available. Selling all my Raspberry Pi gear after giving up on my project. Everything is working and in like-new condition, as it never left my office desk. Selling: $50 -> Raspberry Pi 2 + Clear Case + USB Charger (2.1A, 100-240V) + USB WiFi (no SD card included) $20 each ->...
by CostasVav
Wed Apr 22, 2015 1:44 pm
Forum: Automation, sensing and robotics
Topic: PiHead: Mountable Wireless Live Camera w/ Extras
Replies: 5
Views: 2449

Re: PiHead: Mountable Wireless Live Camera w/ Extras

Update: Android App: Made an app to receive the MJPEG stream. It uses TCP packets, so the delay and stuttering is a little high, but still under 300ms. No blurry images or tearing. Will work on getting the app to automatically connect to a predefined access point (the RPi) on startup and revert back...
by CostasVav
Tue Apr 14, 2015 1:51 pm
Forum: Automation, sensing and robotics
Topic: PiHead: Mountable Wireless Live Camera w/ Extras
Replies: 5
Views: 2449

Re: PiHead: Mountable Wireless Live Camera w/ Extras

I have not bought any sound-related components yet, as that will be after I get the video, motion sensors and smartphone app working. I looked into RPi sound hardware and am a little disappointed in the options. I do not need a full sound card with output, just stereo input. The Cirrus Logic card lo...
by CostasVav
Fri Mar 27, 2015 4:01 pm
Forum: Automation, sensing and robotics
Topic: PiHead: Mountable Wireless Live Camera w/ Extras
Replies: 5
Views: 2449

PiHead: Mountable Wireless Live Camera w/ Extras

Hi everyone! Here is a rundown of my current project, currently dubbed PiHead, which is still in very early stages. Goal: - A low-cost, easily configurable and customizable device that can be mounted on a quadrocopter, car dashboard, paintball gun, or robot, that will stream a live video feed to a s...
by CostasVav
Wed Mar 11, 2015 8:32 pm
Forum: Camera board
Topic: Problem streaming to Windows with Gstreamer SDK
Replies: 22
Views: 14360

Re: Problem streaming to Windows with Gstreamer SDK

I am encountering lots of lag that is dependent on resolution and framerate. At low resolutions like 400x300, I get a low latency (guessing about 200-300ms). The preview on the RPi looks normal. There is minimal distortion on the client. When I bump up the resolution to 720p or 1080p, the preview st...
by CostasVav
Wed Mar 11, 2015 1:21 pm
Forum: Camera board
Topic: Problem streaming to Windows with Gstreamer SDK
Replies: 22
Views: 14360

Re: Problem streaming to Windows with Gstreamer SDK

Pi command: raspivid -t 0 -h 720 -w 1280 -fps 30 -hf -vf -b 4500000 -o - | \ gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay config-interval=5 pt=96 ! udpsink host=192.168.1.143 port=5001 Windows command: gst-launch-1.0 -v udpsrc port=5001 caps='application/x-rtp, media=(string)video, clock-rate=(i...
by CostasVav
Tue Mar 10, 2015 9:14 pm
Forum: Camera board
Topic: Problem streaming to Windows with Gstreamer SDK
Replies: 22
Views: 14360

Problem streaming to Windows with Gstreamer SDK

Hi All, I am attempting to stream my PiCam on my Pi2 to a Windows 7 machine on the same WiFi network. As low latency is a must, I am not using an VLC RTP stream, but currently testing a Gstreamer RTP-UDP stream. I just downloaded Gstreamer SDK 2013.6 (Congo) for my Windows machine and did the comple...
by CostasVav
Fri Feb 20, 2015 10:21 pm
Forum: Camera board
Topic: Camera not working on RPi 2 (ENOMEM error)
Replies: 0
Views: 632

Camera not working on RPi 2 (ENOMEM error)

Hi all, Just received my Pi Camera today and hooked it up to my RPi B 2. The red light turns on on the camera board, without any flickering. I am using a 2A power supply. I have run apt-get update and upgrade, updated the firmware, and running an almost-NOOB installation (have VLC and Pi4J installed...
by CostasVav
Fri Jan 30, 2015 11:05 pm
Forum: Camera board
Topic: Low latency encoding and transmission possible?
Replies: 8
Views: 3035

Low latency encoding and transmission possible?

Hi all, I am looking into a project and not sure if I should use an RPi, and if I do, the RPi camera or a USB camera. The key requirement for the project is to encode the camera input, transmit it to a remote device on the same wi-fi network, and have the remote device (an Android smartphone) play b...

Go to advanced search